QIBEBT-IR  > 多相反应工程研究组
水力旋流器溢流管结构对微细颗粒分离的影响
刘鸿雁1; 王亚1,2; 韩天龙1,2; 黄青山2,3
2017-05-05
发表期刊化工学报
卷号68期号:5页码:1921-1931
产权排序(1)河北工业大学化工学院;(2)中国科学院青岛生物能源与过程研究所;(3) 中国科学院过程工程研究所
摘要针对直径为50 mm的小直径水力旋流器,考察了溢流管插入深度和壁厚以及进口流量对微细物料分离效率的影响,并利用正交分析法得到了溢流管最优的插入深度、壁厚及最适的进口流量。此外,考察了两种套筒式溢流管对水力旋流器分离性能的影响。最后,在最优溢流管结构的基础上,探讨了分流比对分离效率的影响。结果表明:水力旋流器的直筒段具有一定的分离作用;对于微细物料的分离,溢流管采用薄壁且插入深度与水力旋流器直筒段长度相当的设计,有利于提高微细颗粒的分离效率。小直径水力旋流器溢流管的最佳插入深度比例大于大直径水力旋流器的最佳插入深度比例,表明它们的分离行为存在着较大的差异。
其他摘要The separation efficiencies were compared under different vortex finder lengths, thickness and flow rates in a small hydrocyclone with the diameter of 50 mm, and the optimal insertion depth, wall thickness of the vortex finder and flow rate were obtained by using the method of orthogonal design. In addition, the influence of vortex finders with tube-in-tube structure in the hydrocyclone on the separation efficiency was investigated. Finally, the relationship between the split ratio and separation efficiency was analyzed on the basis of the optimal structure for the vortex finder. The experimental results show that the cylindrical part of the hydrocyclone plays an important preliminary separation role. For the separation of fine particles, a thin vortex finder which is extended to the junction between the cylindrical and the conical parts is beneficial to the separation efficiency. The optimum proportion of the vortex finder insertion depth to the hydrocyclone diameter in the small hydrocyclone is bigger than those in the big ones, and it is indicated that there is a remarkable difference of separation between them.
文章类型Article
关键词分离 粒度分布 流动 水力旋流器 溢流管 分离效率 粒级分离效率
DOI10.11949/j.issn.0438-1157.20161478
关键词[WOS]separation ; particle size distribution ; flow ; hydrocyclone ; vortex finder ; separation efficiency ; grade separation efficiency
收录类别EI
语种中文
所属项目编号2016YFB0301701 ; 91434114,21376254 ; YZ201641
资助项目国家重点研发计划项目 ; 国家自然科学基金项目 ; 中国科学院科研装备研制项目
WOS研究方向chemical engineering
项目资助者国家自然科学基金委员会 ; 中国科学院
WOS类目Engineering
WOS记录号CSCD:5981402
引用统计
文献类型期刊论文
条目标识符http://ir.qibebt.ac.cn/handle/337004/9914
专题多相反应工程研究组
通讯作者黄青山
作者单位1.河北工业大学化工学院
2.中国科学院青岛生物能源与过程研究所
3.中国科学院过程工程研究所
推荐引用方式
GB/T 7714
刘鸿雁,王亚,韩天龙,等. 水力旋流器溢流管结构对微细颗粒分离的影响[J]. 化工学报,2017,68(5):1921-1931.
APA 刘鸿雁,王亚,韩天龙,&黄青山.(2017).水力旋流器溢流管结构对微细颗粒分离的影响.化工学报,68(5),1921-1931.
MLA 刘鸿雁,et al."水力旋流器溢流管结构对微细颗粒分离的影响".化工学报 68.5(2017):1921-1931.
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
水力旋流器溢流管结构对微细颗粒分离的影响(1220KB)期刊论文作者接受稿开放获取CC BY-NC-SA浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[刘鸿雁]的文章
[王亚]的文章
[韩天龙]的文章
百度学术
百度学术中相似的文章
[刘鸿雁]的文章
[王亚]的文章
[韩天龙]的文章
必应学术
必应学术中相似的文章
[刘鸿雁]的文章
[王亚]的文章
[韩天龙]的文章
相关权益政策
暂无数据
收藏/分享
文件名: 水力旋流器溢流管结构对微细颗粒分离的影响.pdf
格式: Adobe PDF
此文件暂不支持浏览
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。